Are you frustrated with your Vizio sound bar subwoofer not working? You’re not alone. This is a common problem, but there are a few simple solutions that you can try.
In this blog post, we’ll show you how to check if your subwoofer is getting power, make sure it’s paired with your sound bar, reset it, and troubleshoot other common problems. By the end of this post, you’ll know how to fix your Vizio sound bar subwoofer and get it up and running again.
Check If Your Vizio Sound Bar Subwoofer Is Getting Power
The most obvious first step is to check if your Vizio sound bar subwoofer is properly plugged in and receiving power. If the power cable isn’t fully connected to the wall outlet or the subwoofer itself, it won’t be able to produce those deep low-frequency sounds.
Assure that the power cable is securely plugged into both the wall socket and the subwoofer. Also check that any power strips or surge protectors the sound bar system is connected to are switched on.
If the power cable looks undamaged and properly connected but the subwoofer still isn’t working, it’s possible the cable itself has an internal fault or break that needs replacement. You may need to contact Vizio support to inquire about a replacement power cable for your specific sound bar model.
Another thing to try is using a different wall outlet to plug the subwoofer into. There’s a small chance the outlet you’re currently using has a problem and isn’t providing consistent power to the device. Switch to another outlet, especially one on a different wall circuit, and see if the subwoofer starts working again.
With any luck, double-checking these basic power issues will get your Vizio subwoofer booming again. But if you continue to experience problems, it may indicate an internal hardware or software issue with the sound bar itself. In that case, you should contact Vizio’s customer support for further help troubleshooting and potential repair or replacement options.
Make Sure Your Subwoofer is Paired With Your Sound Bar
The most common reason a subwoofer stops working is that it loses its connection to the sound bar. These are the steps to re-pair your Vizio sound bar subwoofer:
You need to be sure that your subwoofer is plugged in and the power light is on. If not, plug it in and turn it on.
And then, locate the pairing or sync button on your subwoofer. It’s typically a small button on the back or side of the unit. Press and hold it down for 3-5 seconds until the power light starts blinking.
After the previous step, find the same pairing or sync button on your Vizio sound bar. It may be on the back, side or underneath the bar. Press and hold it down for the same amount of time, 3-5 seconds, until its display starts blinking as well.
In the end, within 30 seconds of pressing the buttons, the subwoofer power light will stop blinking and remain solid, indicating it has re-connected to the sound bar. The sound bar display will also stop blinking. Your subwoofer should now be working properly again with deep, rich bass!
If the pairing process doesn’t work, try unplugging both units for a few minutes and then repeat the steps. You may also need to go into your Vizio sound bar menu to enable the subwoofer. But in most cases, a quick re-pairing does the trick to get your home theater back in action.
Reset your subwoofer
To make your Vizio sound bar subwoofer work again, try resetting your subwoofer. Follow these instructions to reset your subwoofer:
- Unplug the power cable from the subwoofer for at least 30 seconds. This will reset the subwoofer and clear its memory.
- Plug the power cable back in and turn the subwoofer back on. The subwoofer should automatically pair back to the soundbar.
- If that doesn’t work, try unplugging the power cable from the soundbar as well for 30 seconds. Then plug in the soundbar, wait for it to fully turn on, and then plug in the subwoofer. This reset of the whole system may do the trick.
- As an alternative, some Vizio sound bars have a dedicated Subwoofer Pairing or Reset button. Press and hold this button for 5 to 10 seconds until the status light on the subwoofer blinks. This will reset the pairing between the soundbar and subwoofer so you can connect them again.
- Check that the green status light on the back of the subwoofer is on, indicating it has power and is ready to pair. If not, try switching outlets or power cables to rule out any issues there.
- Ensure the subwoofer is within 30 feet of the soundbar for the best connectivity. Physical obstructions like walls can also interfere with the signal between the two devices.
- If problems continue, you may need to do a hard reset of your sound system to factory default settings. Check your Vizio sound bar’s manual for specific steps to reset to default. This should resolve any software issues preventing your subwoofer from connecting.
With some patience and troubleshooting, you can get your Vizio sub thumping again. Let me know if any of these steps help resolve your issue!
Other troubleshooting tips
If your Vizio sound bar subwoofer isn’t still working, don’t worry, there is still hope – some rest of the things you can try to get it up and running again.
Check the cables connecting the subwoofer to the soundbar.
Initially check that the cable connecting the subwoofer to the sound bar is fully plugged in at both ends. A loose or unplugged cable is a common issue. Make sure the jack is pushed all the way into the subwoofer and sound bar.
Make sure the subwoofer is compatible with your sound bar
Confirm that your subwoofer model is compatible with your Vizio sound bar. Vizio offers different subwoofer options for their various sound bar models. Check Vizio’s website or your product manual to ensure you have the correct subwoofer for your sound bar. If needed, you may need to purchase a compatible subwoofer.
Update the firmware on the subwoofer and sound bar
It’s also a good idea to update the firmware on both your sound bar and subwoofer. Software updates often contain bug fixes and improvements to connectivity. You can download the latest updates from Vizio’s support website.
Contact Vizio customer support for help.
If you’ve tried the steps above and your subwoofer is still not working, contact Vizio’s customer support for additional help. They can troubleshoot with you over the phone and may even be able to dispatch a technician if needed. Vizio aims to provide great customer service to get your sound system up and running again.
Conclusion
So, there you have it. These are a few simple fixes that you can do from your end to make your Vizio sound bar subwoofer work again. We hope this blog post has been helpful. If your problem still continues, try reaching out to the Vizio customer help center.
Related Article:
1. Vizio sound bar HDMI arc not working